Микросхема STM32F358RCT6

Характеристики

STM32F358RCT6The STM32F358RCT6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 256kB and 48kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, seven comparators, four operational amplifiers, up to two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer and two timers dedicated to motor control, as well as standard and advanced communication interfaces — two I²Cs, three SPIs, two I²Ss, three USARTs, two UART and a CAN.

• CRC calculation unit
• Low-power modes — Sleep and stop
• VBAT supply for RTC and backup registers
• 4 to 32MHz Crystal oscillator
• 32kHz Oscillator for RTC with calibration
• 8MHz Internal RC with x 16 PLL option
• 40kHz Internal oscillator
• Interconnect matrix
• 12-channel DMA Controller
• 2 Watchdog timers (independent, window)
• SysTick timer — 24-bit downcounter
• Calendar RTC with alarm, periodic wakeup from stop
• CAN interface (2.0B Active)
• Infrared transmitter
• Cortex®-M4 with FPU ETM, Serial wire debug, JTAG
• 96-bit Unique ID

Микросхемы / Микроконтроллеры / Микроконтроллеры STM — 32-битные
Корпус: 64-LQFP (10×10), инфо: MCU 32-bit STM32 ARM Cortex M4 RISC 256KB Flash 1.8V/2.5V/3.3V